12V 100A AGM Battery Charger Constant Current Charging With Multi
Stages And Protections
Brief Description:
12V 100A AGM / GEL deep cycle battery charger, input with 110 /
230Vac and rated output voltatge is 12V 100A. Smart max charging
voltage is 14.4 / 14.7V for SLA type batteries or AGM batteries.
Intelligent 4 steps charging with pre-charge, CC, CV and floating /
trickle steps, this charger will charge your battery powered
electric vehicles very fast and safe (automatic lockout when charging), with high
efficiency and pretect your battery life maximumly. High quality,
factory price and 2 years warranty.
Technical Specs.:
1) Dimensions(LxWxH): 330 x 150 x 90 mm
2) Net weight: 6.5 KG
3) Max charging voltage(CV): 14.4 / 14.7 volt
4) Floating voltage: customized
5) Max output current (CC): 100 amps
6) Charging method: pre-charge, CC, CV, floating / trickle or shut off
7) AC input voltage: 110 / 240Vac
8) AC input freq.: 50 / 60 Hz
9) AC plug: customized by user’s country
10) Output connector type: customized by applications
11) Enclosure: Aluminum
| Output series: 2,000W Size: 330×150×90 mm Net weight: 6.5 KG |
| Input | Model | Apply to battery types | Floating V | CV (V) | CC (A) | Switching |
AC Input: 110 / 230V
Frequency: 47~63HZ
| VL12100L | 12V LiFePO4 Battery | | 14.6V | 100A | CC5~8% |
| VL12100 | 12V Lead-acid Battery | 13.5V | 14.7V | 100A | CC20% |
| VL14100 | 14V AGM Battery | 13.5V | 14.4V | 100A | CC20% |
| VL16100L | 16V LiFePO4 Battery | | 18.2V | 100A | CC5~8% |
| VL2460LM | 24V Li-MnO2 Battery | | 29.4V | 60A | CC5~8% |
| VL2460L | 24V LiFePO4 Battery | | 29.2V | 60A | CC5~8% |
| VL2460 | 24V Lead-acid Battery | 27.6V | 29.4V | 60A | CC20% |
| VL3640LM | 36V Li-MnO2 Battery | | 42V | 40A | CC5~8% |
| VL3640L | 36V LiFePO4 Battery | | 43.8V | 40A | CC5~8% |
| VL3640 | 36V Lead-acid Battery | 41.4V | 44.1V | 40A | CC20% |
| VL4830LM | 48V Li-MnO2 Battery | | 54.6V | 30A | CC5~8% |
| VL4830L | 48V LiFePO4 Battery | | 43.8V | 30A | CC5~8% |
| VL4830 | 48V Lead-acid Battery | 55.2V | 58.8V | 30A | CC20% |
| VL6025L | 60V LiFePO4 Battery | | 73V | 25A | CC5~8% |
| VL6025 | 60V Lead-acid Battery | 67.5V | 73.5V | 25A | CC20% |
| VL7220L | 72V LiFePO4 Battery | | 87.6V | 20A | CC5~8% |
| VL7220 | 72V Lead-acid Battery | 81V | 88.2V | 20A | CC20% |
| VL8418L | 84V LiFePO4 Battery | | 102.2V | 18A | CC5~8% |
| VL8418 | 84V Lead-acid Battery | 94.5V | 102.9V | 18A | CC20% |
| VL9616L | 96V LiFePO4 Battery | | 116.8V | 16A | CC5~8% |
| VL9616 | 96V Lead-acid Battery | 108V | 117.6V | 16A | CC20% |
| Note: customized input / output / plug type / connectors are
available. |
Function description
1.Input voltage
Input voltage range is 90~132Vac or 198~264Vac
The provided input voltage must fall within the specified range ,otherwise the unit maybe
non-functional ,also the active PFC circuit may fail or get damaged.
2.PFC
Built- in active PFC circuit: PF>0.95 when input voltage is
between 90~132Vac or 198~264Vac
with full load at the output . On the other hand, if the input
voltage is >230V or output is not at full load,
the PF will drop below 0.95.
3.Reverse polarity protection
With built-in battery reverse polarity detection circuit. When the
battery is connected in reverse at the output terminal of the
charger, the output diode will broken to protected the charger.
4. Fan control
With built- in fan speed control circuit, the fan will
automatically change speed depending on load condition.
5.Temperature compensation
Temperature sensor which comes with the charger can be connected to
the unit to allow temperature compensation of the charging voltage.
If the temperature sensor is not used, the charger can still work
normally.
FAQ
Q. Are you a factory or trading company?
A. Danl is battery charger factory and we found in 2008. We have
being in switching mode power supply and charger industrial for 15
years and have 10 years of exporting experience to worldwide
especially to the high lever market of North America and Euro
countries.
Q. What's about the warranty for Danl battery chargers?
Danl promises that we provide full 2 years warranty for our battery
chargers. No return for faulty battery chargers firstly, we send
you new replacing chargers firstly. Danl adopts latest ATE Automatic Battery Charger Testing System to test all of our battery chargers before shipping, guaranteeing
extremely low rate of failure. So we have confidence to provide 2
years warranty.
Q. Do you accept OEM order?
A. Yes, we do. Danl provides OEM, ODM service. Please just tell us
your project and we will provide a full charging solution for you,
for example, your customized electric vehicles, sun-powered
stations, racing batteries, on-board charging, etc.
Q. What is about the lead time for an order?
A. Normally, lead time is 7 days. If need large quantity, say 500
to 1000pcs, it will take about 15 days. If you need ODM charging
solution, lead time depends on technical request, often it needs
about 30 days.
